RENNtech ECU+ Upgrade | C238 | E450 | 392 HP/463 LB-FT | 3.0L V6 BiTurbo | M276

RENNtech has been at the forefront of ECU tuning since electronic engine management started to show up in vehicles during the mid 1980s! Our experience, countless hours of in-house research, development and exhaustive testing ensure that our proprietary ECU upgrade offers incredible performance gains and rock solid daily driver reliability.

RENNtech tuning software for Mercedes offers significant gains in horsepower and torque across the vehicle's entire power band. By modifying ignition timing and throttle mapping, optimizing air-to-fuel ratios, increasing the engine's rev limiter and modifying boost mapping for turbo-charged vehicles, RENNtech performance software unleashes the true potential of your Mercedes.

With the proprietary RENNtech ECU Tuning the C238 - E 450 Coupe gains up to +30 HP and +84 LB-FT, based on power numbers measured by RENNtech. Please note that the Mercedes M276 engine performance when measured, obtains higher numbers than rated from factory. The maximum power number reached with the RENNtech ECU Upgrade for the E 450 Coupe is 392 HP and 463 LB-FT.

Notes:

• We have found the M177 engine stock performance numbers vary from the baseline figures claimed by Mercedes-Benz. We typically see higher baseline numbers than claimed by the factory.
• Power gains are calculated based on stock numbers measured by RENNtech. Crank Performance Numbers are calculated with a 17% Drivetrain loss on 4MATIC vehicles.
• Numbers published by MBUSA are an average over a 750rpm range for HP and a 2,400rpm range for TQ. Power gains are calculated based on the peak stock performance measured by RENNtech.
• Our numbers will be dependent on conditions and fuel quality. 93+ Octane gasoline is mandatory with this Performance Upgrade.
• States known for poor fuel quality have to be supplied with a lower power setup. Please call for details and Race fuel options +1-561-845-7888.